Displays the basic principles and structures of electronically controlled gasoline engine, and simulates its operation.

This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.

Equipped with fault simulation systems can simulate multiple failures in the real engine.

Equipped with voltmeter to show the real-time change of the sensors and actuators

Equipped with LED light to simulate the status of the injecting system and ignition system.

Equipped with pressure gauges to display the pressure value and vacuum pressure value.

Equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine control system through the diagnosis seat.

The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.

There are test terminals mounted on the training panel. electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.

Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.

Equipped with fault setting module: manual fault set module or Intelligent fault module. 

Technical parameter Dimension: Minimum 1400x1000x1800mm; (L x W x H)

The engine model needs to be specified by supplier

The base portion of the training panel is welded with steel structure. The panel cabinet is stamped and it is separable from the base. The bench surface has used the paint technology with a direction of self-locking casters device.

Working power: 12V/60AH battery

Fuel tank capacity: Minimum 12L